• ATtiny85-20PU

The ATtiny85-20PU is a great microcontroller, for reducing the size of the breadboard circuit, when using only a few pins. This microcontroller is arduino compatible and can be used to shift the arduino project onto a breadboard.

The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB ISP flash memory, 512B EEPROM, 512-Byte SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit A/D converter, programmable watchdog timer with internal oscillator, three software selectable power saving modes, and debugWIRE for on-chip debugging. The device achieves a throughput of 20 MIPS at 20 MHz.

Features:
MCU, 8BIT, ATTINY, 20MHZ, DIP-8, RISC Architecture
Controller Family/Series: ATtiny
Program Memory Size: 8KB
RAM Memory Size: 500Byte
CPU Speed: 20MHz
No. of I/O's: 6
MCU Case Style: DIP
No. of Pins: 8
Embedded Interface Type: I2C, SPI
Operating Voltage: 2.7V-5.5V
Core Size: 8bit
EEPROM Memory Size: 512Byte
No. of ADC Inputs: 4
No. of Timers: 2
Operating Temperature Range: -40°C to +85°C
Oscillator Type: Internal
Peripherals: ADC, Comparator
Program Memory Size: 8KB
Supply Voltage Range: 2.7V to 5.5V
Termination Type: Through Hole
Non-volatile Program and Data Memories

Links:
Programming ATtiny with Arduino [Tutorial]

Write a review

Note: HTML is not translated!
    Bad           Good

ATtiny85-20PU

  • INR 129.99


Related Products

USB ASP ISP - 10 Pin

USB ASP ISP - 10 Pin

This programmer is based on Thomas Fischl's USBasp design and connects to your computer's USB port. ..

INR 200.00

Magician Robot Controller

Magician Robot Controller

Magician = Arduino UNO + 0.8A Motor Driver + Servo Shield + Sensor Shield The Magician' Dual 0.8A..

INR 1,990.00 INR 2,700.00

FTDI FT232RL Programmer

FTDI FT232RL Programmer

This programmer uses the FTDI FT232RL USB-to-Serial converter chip. The pinout of this board matches..

INR 200.00

Chineduino Uno

Chineduino Uno

The Chineduino Uno is a clone of the Arduino Uno microcontroller board based on the ATmega328 with 1..

INR 420.00

Chineduino Mega

Chineduino Mega

The Chineduino Mega 2560 is a clone of Arduino Mega microcontroller board based on the ATmega2560. I..

INR 680.00

Chineduino Lilypad

Chineduino Lilypad

The Chineduino Lilypad is a clone of the Lilypad Arduino 328 main microcontroller board designed to ..

INR 400.00

16MHz Crystal Oscillator (4pcs)

16MHz Crystal Oscillator (4pcs)

Includes: 4 16Mhz Crystal Oscillator ..

INR 24.00

Resistance Box

Resistance Box

This box includes 5 pieces of 30 different value of 1/4W resistances, for a total of 150 resistances..

INR 45.00

Chineduino ProMini

Chineduino ProMini

The Chineduino ProMini is a clone of the Arduino ProMini microcontroller board based on the ATmega32..

INR 220.00

Line Follower Kit

Line Follower Kit

Create your own line follower or edge avoider robot with this complete kit.Includes:1 ATmega8 Develo..

INR 700.00

DTMF Robot Kit

DTMF Robot Kit

Create your own cellphone controlled DTMF robot with this complete kit.Includes:1 Boot Board1 A-to-B..

INR 750.00

Chineduino Lilypad USB

Chineduino Lilypad USB

The Chineduino Lilypad is a clone of the Lilypad Arduino USB microcontroller board designed to be in..

INR 550.00

Chineduino LilyTiny

Chineduino LilyTiny

The Chineduino LilyTiny is a clone of the LilyTiny Arduino microcontroller board designed to be inte..

INR 300.00

Digispark USB Development Board

Digispark USB Development Board

Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only c..

INR 210.00

Tags: atmega, at, mega, tiny, attiny, 85, attiny85, 20, pu, 20PU, attiny85-20pu, uno, ftdi, arduino, chineduino, duino, bread, board, breadboard, microcontroller, micro, controller, control, uc

Discounted Products

FlashForge Creator Pro

FlashForge Creator Pro

Rated in the Top 2 3D Printers of 2015, FlashForge Creator Pro is built for beginners and profession..

INR 89,000.00 INR 112,300.00

FlashForge Dreamer

FlashForge Dreamer

Rated in the Top 2 3D Printers of 2015, FlashForge is built for beginners and professionals alike.Dr..

INR 109,900.00 INR 135,000.00

FlashForge Finder

FlashForge Finder

Rated in the Top 2 3D Printers of 2015, FlashForge is built for beginners and professionals alike.Fi..

INR 49,900.00 INR 64,999.00

Magician Robot Controller

Magician Robot Controller

Magician = Arduino UNO + 0.8A Motor Driver + Servo Shield + Sensor Shield The Magician' Dual 0.8A..

INR 1,990.00 INR 2,700.00

Mini Driver Robot Controller

Mini Driver Robot Controller

Mini Driver = Arduino NG + 2A Motor Driver + Servo Shield + Sensor Shield + Bluetooth Shield + ISP P..

INR 1,600.00 INR 2,999.00

Robotic Claw

Robotic Claw

This fun robotic claw is ideal for those who love all things robotic! Simple instructions and suppli..

INR 750.00 INR 1,200.00

Spider Robot Controller

Spider Robot Controller

Spider = Arduino Mega + Servo Shield + Servo Expansion Shield This programmable controller from D..

INR 6,200.00 INR 10,499.00