• Motor Driver Shield

The Motor Driver Shield can be used to run 2 Servo motors and 2 Stepper motors (or 4 DC Motors) simultaneously.

The servo pins use the Digital pins 9 and 10 of the Uno. Each 5-pin stepper motor connecter can be used to connect 2 DC motors if steppers are not used.

Features:
2 3-pin headers for Servo motors
2 5-pin connectors for Stepper motor
6 rows for connecting sensors to Analog ports
Input Voltage: 5-12V
Compatible with Arduino Uno and Mega

Write a review

Note: HTML is not translated!
    Bad           Good

Motor Driver Shield

  • INR 275.00


Related Products

SG90 Micro Servo

SG90 Micro Servo

This servo motor is highly suitable for building Pan-Tilt assembly, Robot-Hand control and other sim..

INR 500.00

200RPM Central Shaft

200RPM Central Shaft

Ideal for most mobile robot projects, this motor operates in 6-12V range. Comes soldered with wir..

INR 129.75

BO Single Shaft Straight

BO Single Shaft Straight

Great for many low voltage mobile robot projects, this motor and gearbox combination operates in 3-6..

INR 68.50

MG90 Micro Servo

MG90 Micro Servo

This metal gear servo is most used in camera pan-tilt assembly which requires higher torque than the..

INR 950.00

300RPM Central Shaft

300RPM Central Shaft

Ideal for most mobile robot projects, this motor operates in 6-12V range. Comes soldered with wir..

INR 129.75

BO Single Shaft L-Shaped

BO Single Shaft L-Shaped

Great for many low voltage mobile robot projects, this motor and gearbox combination operates ideall..

INR 68.50

Chineduino Uno

Chineduino Uno

The Chineduino Uno is a clone of the Arduino Uno microcontroller board based on the ATmega328 with 1..

INR 420.00

NEMA 17 Stepper Motor - Unipolar

NEMA 17 Stepper Motor - Unipolar

These unipolar stepper motors are used in the 3D printers for guiding the extruder assembly accordin..

INR 750.00

NEMA 17 Stepper Motor - Bipolar

NEMA 17 Stepper Motor - Bipolar

These bipolar stepper motors are used in the 3D printers for guiding the extruder assembly according..

INR 850.00

300RPM Johnson Geared Side Shaft

300RPM Johnson Geared Side Shaft

Ideal for off road mobile robots with higher torque requirements. This motor operates in 9-12V range..

INR 385.00

Stepper Motor - Small

Stepper Motor - Small

This stepper motor is used in small projects. It reduces the 360° turn of the motor to 64 steps, eac..

INR 140.00

Chineduino Mega

Chineduino Mega

The Chineduino Mega 2560 is a clone of Arduino Mega microcontroller board based on the ATmega2560. I..

INR 680.00

SG90 Micro Servo - Clone

SG90 Micro Servo - Clone

SG90 servo motor is highly suitable for building Pan-Tilt assembly, Robot-Hand control and other sim..

INR 160.00

Line Follower Kit

Line Follower Kit

Create your own line follower or edge avoider robot with this complete kit.Includes:1 ATmega8 Develo..

INR 700.00

DTMF Robot Kit

DTMF Robot Kit

Create your own cellphone controlled DTMF robot with this complete kit.Includes:1 Boot Board1 A-to-B..

INR 750.00

MG90S Micro Servo - Clone

MG90S Micro Servo - Clone

This metal gear servo is most used in camera pan-tilt assembly which requires higher torque than the..

INR 330.00

Motor Shield V2.0

Motor Shield V2.0

The Motor Shield is a driver module for motors that allows you to use Arduino to control the working..

INR 1,950.00

4A Motor Shield

4A Motor Shield

The 4A Motor Shield is based on the Freescale MC33932 dual H-Bridge Power IC , which can control ind..

INR 3,850.00

Tags: l293d, l, 293, d, uln, 2003, uln2003, step, stepper, servo, dc, motor, small, 200, 300, arduino, shield, chine, duino, uno, nano, mega, robo, rium, roborium, india, indian, robot, robotics, online, store, stores, robo, robotic, price, part, component, parts, components, delhi, mumbai, kolkata, allahabad, chennai, bangalore, banglore, bombay, calcutta, punjab, lucknow, pune, servo, servos, motor, sensor, motors, sensors, arduino, hand, gripper, kit, arduino, humanoid, payment