The HC-05 Bluetooth module is can be used in a Master or Slave configuration, making it a great solution for wireless communication. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project, etc. The module comes with an optional custom app that you can install on your Android phone and Arduino code that you can edit and upload to your Chineduino Uno to build bluetooth controlled car with 2 wheel drive.
Protocol: Bluetooth Specification v2.0+EDR
Frequency: 2.4GHz ISM band
Emission power: ≤4dBm, Class 2
Sensitivity: ≤-84dBm at 0.1% BER
Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
Security: Authentication and encryption
Profiles: Bluetooth serial port
Power supply: +3.3VDC 50mA
Working temperature: -20 ~ +75 Centigrade
AxleCar App Wiki
||3.3V ; 50mA
|Number of Pins
||6 (Vcc, GND, TXD, RXD, KEY, LED)
||26.9 x 13 x 2.2 mm
The Chineduino Uno is a clone of the Arduino Uno microcontroller board based on the ATmega328 with 1..
This is a set of five, 32 cm long, 1 pin Female-to-Female header jumper wires.
This is a set of three, 32 cm long, 3 pin Female-to-Female header jumper cables.
This wireless transceiver module is an easy and suitable module if you want to setup your wireless c..
This small breadboard is the perfect accessory when you want to create a small circuit without solde..
The Chineduino Nano 3.0 is a clone of the Arduino Nano microcontroller board based on the ATmega328 ..
This module has 2 relays to help you control the appliances around your house. Highly useful in appl..
The Chineduino Mega 2560 is a clone of Arduino Mega microcontroller board based on the ATmega2560. I..
This module has 4 relays to help you control the appliances around your house. Highly useful in appl..
The Chineduino ProMini is a clone of the Arduino ProMini microcontroller board based on the ATmega32..
This module has a single relay to help you control the appliances around your house. Highly useful i..