Dynamixel AX-12A is a new version of the AX-12+ motor, with the same performance, but more advanced external design. It is 100% compatible with AX-12+ at 1:1 scale, with the same control method.
1 x B01 Horn
1 x FP04-F2 Frame
1 x FP04-F3 Frame
1 x BPF-WA/BU Set
1 x 3P Cable 200mm
16 x Bolt PHS M2*6
1 x Bolt PHS M3*10
16 x N1 NUT M2
|Servo Motor Details
||Plastic; Ratio= 254:1
||15.3 kg*cm (12V)
||Actuator Mode: 0-300 degrees, Wheel Mode: Endless turn; Precision: 300 degrees / 1024
||59 RPM (12V)
||-5°C to 70°C
||32 x 50 x 40 mm
- Brand: Robotis
- Product Code: RTDYAXA12
- Availability: Delivered in 1-3 Weeks
Can easily extends ports thanks to 6 X 3P connectors on it.Can be used to extend the ports when the ..
Dynamixel AX-12W is another great motor from Robotis, useful for creating robot joints which need mo..
Dynamixel AX-18A motor is used to replace robot joints which require more torque and speed than AX-1..
USB2Dynamixel connects to the PC's USB port and has both a 3 pin and 4 pin port to connect Dynamixel..
The Bioloid Premium Kit can be used to create robots such as - Spider, Scorpion, Puppy, Dinosaur, an..
The Bioloid GP (Grand Prix) kit is used to create humanoids with 18 DOF which are used mainly in hum..
Intended for use with AX series and MX series (TTL) Dynamixel motors, this wire supports AX-12A, AX-..
OpenCM 485 Expansion Board connects to OpenCM9.04 controllers to use Dynamixels that support RS-485 ..
OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3. It is possible to use t..
The Bolt Nut Set BNS-10 is used to assemble the AX-12+ and AX-S1 with the CM-5. When the bolts and n..
Bioloid exclusive plastic washer and bushing that can be used as a bearing when assembled with the h..
This device provides power from the SMPS to the dynamixel. Connect the SMPS(for CM-5) to the DC term..