Arduino Uno is the most popular Arduino board so far, however it is sometimes frustrating when your project requires a lot of sensors or LEDs and your jumper wires are in a mess. The purpose of creating the Grove – Base Shield is to help you getting rid of bread board and jump wires. With the rich grove connectors on the base board, you can add all the grove modules to the Arduino Uno very conveniently!
Every Grove connector has four wires, one of which is the VCC. However, not every micro-controller main board needs a supply voltage of 5V, some need 3.3V. That's why we add a power toggle switch to Base Shield v2 so that you can select the suitable voltage of the micro-controller main board you are using via this switch. For example, if you are using Arduino UNO with Base Shield v2, please turn the switch to 5v position; while using Seeeduino Arch with Base Shield v2, please turn the switch to 3.3v.
The pinout of Base Shield V2 is the same as Arduino Uno R3, however Arduino Uno is not the board one that the Base Shield V2 is compatible with. The compatible boards are: Arduino Uno, Seeeduino V4.2, Arduino Mega / Seeeduino Mega, Seeduino LoraWan, Arduino Leonardo / Seeeduino Lite, Arduino 101, Arduino Due, Intel Edison, Linkit On
4 Analog Connectors
7 Digital Connectors
1 UART Connector
4 I2C Connectors
Green LED to indicate power status
Grove Base Shield V2
- Brand: Seeed Studio
- Product Code: SDGROBASV2
- Availability: Delivered in 1-3 Weeks