• T'REX Metal Tank

T’REX Tank is an all-metal tank chassis designed for all-terrain robot projects. All six lower wheels have independent suspension to help improve traction and absorb shock. High ground clearance of 70mm allows the T’REX to handle very rough terrain.

There is plenty of room inside for batteries, the T’REX controller and a development board. The T’REX has 12V motors so a 3S LiPo battery, 5000mAh or better, is recommended. The T’REX controller includes a switch-mode power supply that can efficiently supply 6V for servos and 5V for a development board.

The aluminium body (of size: 355 x 265 x 130mm) will block electrical noise and radio signals so it is recommended that all radio transmitters / receivers, GPS and compass modules are mounted on top of the chassis.

The front sensor panel can be removed to make it easy to drill mounting holes for sensors. This panel can also be reversed so that sensors can be mounted further back. If you have a 3D printer you may prefer to remove this panel and replace it with a custom front panel.

The body is aluminium, the gears, tracks, suspension struts and wheels are die cast zinc. These metals offer good corrosion resistance so no maintenance for these parts is required. The idler wheels can be easily removed for cleaning by removing the circlip on the shaft. Be careful when removing these as they are under spring tension and may shoot off. The idler wheels have brass bushes that require minimum maintenance. A dry lubricant should be used for the idler wheels and gearbox.

The T'REX motors are 12V and work best from a 3S LiPo 5000mAh or better. Each motor has a stall current of 11A so you need a beefy motor controller. The chassis included mounting holes for either a Wild Thumper controller or the T'REX robot controller.

The front and top covers are held in place with spring catches mounted between the wheels. To release the front cover, slide the front catch releases on both sides towards the back. The front cover should then lift up so it can be easily opened. To release the top cover, slide the rear catch releases on both sides to the back. The top cover will then lift up slightly so it can be easily removed. To lock these covers back in place, push down firmly until you hear the catches “click”. Please note that the top cover can only go in one way.

Includes:
Chassis
Motors

 

Write a review

Note: HTML is not translated!
    Bad           Good

T'REX Metal Tank

  • INR 37,500.00


Related Products

T'REX Controller

T'REX Controller

T'REX controller = Arduino Nano + 18A Motor Driver + Accelerometer + Servo Shield + Bluetooth Shield..

INR 14,999.00

Discounted Products

FlashForge Creator Pro

FlashForge Creator Pro

Rated in the Top 2 3D Printers of 2015, FlashForge Creator Pro is built for beginners and profession..

INR 90,900.00 INR 112,300.00

FlashForge Dreamer

FlashForge Dreamer

Rated in the Top 2 3D Printers of 2015, FlashForge is built for beginners and professionals alike.Dr..

INR 109,900.00 INR 135,000.00

FlashForge Finder

FlashForge Finder

Rated in the Top 2 3D Printers of 2015, and one of the best 3D Printers for Plug-and-Play FlashForge..

INR 49,900.00 INR 64,999.00

FlashForge Guider II

FlashForge Guider II

Guider II is an industrial grade 3D printer designed for the extreme hobbyist or pro user in mind. T..

INR 173,000.00 INR 199,900.00

FlashForge Hunter

FlashForge Hunter

The best DLP 3D Printer on the market! Flashforge Hunter is an advanced digital light processing (DL..

INR 359,900.00 INR 397,000.00

FlashForge Inventor

FlashForge Inventor

Inventor is a filament-based 3D printer with a totally-enclosed design that is safe to use indoors a..

INR 108,900.00 INR 124,900.00

FlashForge Inventor II

FlashForge Inventor II

Inventor II is the newest filament-based 3D printer designed for children and complete beginners who..

INR 59,200.00 INR 66,990.00

Magician Robot Controller

Magician Robot Controller

Magician = Arduino UNO + 0.8A Motor Driver + Servo Shield + Sensor Shield The Magician' Dual 0.8A..

INR 1,990.00 INR 2,700.00

Mini Driver Robot Controller

Mini Driver Robot Controller

Mini Driver = Arduino NG + 2A Motor Driver + Servo Shield + Sensor Shield + Bluetooth Shield + ISP P..

INR 1,600.00 INR 2,999.00

Robotic Claw

Robotic Claw

This fun robotic claw is ideal for those who love all things robotic! Simple instructions and suppli..

INR 750.00 INR 1,200.00

Spider Robot Controller

Spider Robot Controller

Spider = Arduino Mega + Servo Shield + Servo Expansion Shield This programmable controller from D..

INR 6,200.00 INR 10,499.00