Wild Thumper 6WD is a general purpose robot chassis kit used to build all terrain robots with six wheel drive.

This all terrain robot chassis is made from 2mm thick anodised aluminium plate with stainless steel and nickel plated brass fittings. With 6 powerful steel geared motors, spiked tractor tyres and a "Super Twist" suspension system to keep all wheels on the ground this chassis will let your robot go almost anywhere!

Outdoor rescue robot research universities is not only an important issue, but also the direction of development of military applications, Otani 6 drove the emergence of search and rescue work outdoors is undoubtedly driven 6WD its suspension system is the world's first outdoor search and rescue aircraft highlight, with its excellent ground adaptability and strong momentum confirm this suspension system of outstanding results; Meanwhile, large diameter rubber tires and high torque gear motor is the rare, it will be the biggest highlight of the outdoor models.

This is a 6-wheel drive chassis. The chassis using the original, similar to the off-road vehicle suspension system suspension device that allows the body to the grass, gravel road lights speeding on complex (no-load state can easily climb gradient of 30 degrees stairs).

In addition, this section outdoor rescue platform trucks can carry Otani "six degrees of freedom robotic arm" (such as the installation of a robotic arm, use two sets of NiMH battery pack independent drive), you can become an outstanding performance wilderness search and rescue robots.

Both schools, research institutions or enterprises robot, which the 6-drive chassis is a cost-effective teaching and research robot platform.

It should be noted that the Wild Thumper chassis's are high powered chassis's designed to work with popular 7.2V NiMh or 7.4V LiPo battery packs. The chassis comes pre-wired however power wiring between the battery and the controller should be automotive wire with at least a 20A rating.

Each unit comes pre-assembled in a colour printed box. Wheels only need to be fitted with supplied allen key. A simple printed manual is included. Random Color is chosen during Shipping.

More than 30CM height above the side of the fall, may be motor gear box cause permanent flawed.

Features:
Colors: Silver or Black
75:1 gearbox
Compatible with 6DOF Arm
Size: 425 * 300 * 120mm
Chassis Universal plate (fixed plate) Aperture: 4MM
Rated Voltage: DC 6V (minimum 2V maximum 7.5V)
Maximum Stall Current 5.5A
Each motor no-load current: 350mA
Motor RPM: 10000 + / - 5%
Output shaft speed: 295rpm + / - 5%
Stall Torque: 4Kg/cm
Bike Weight: 3.5KG
Single motor torque: 12Kg · cm
Rated voltage: 7.2V
Maximum traction force: 28N
Maximum Load: 6KG
Slow. Suitable for lawn, snow, mounds, stone ground, climb stairs, powerful, load slightly stronger.

Write a review

Note: HTML is not translated!
    Bad           Good

Wild Thumper 6WD with 75:1 Gearbox

  • INR 44,000.00


Related Products

T'REX Controller

T'REX Controller

T'REX controller = Arduino Nano + 18A Motor Driver + Accelerometer + Servo Shield + Bluetooth Shield..

INR 14,999.00

6 DOF Arm

6 DOF Arm

This 6 DOF Arm is approximately 40cm in length and extends the MKII Robotic Claw to create a fully f..

INR 21,000.00

Wild Thumper 6WD with 34:1 Gearbox

Wild Thumper 6WD with 34:1 Gearbox

Wild Thumper 6WD is a general purpose robot chassis kit used to build all terrain robots with six wh..

INR 44,000.00

Tags: wild, thumper, 6wd, encoder, gripper

Discounted Products

FlashForge Creator Pro

FlashForge Creator Pro

Rated in the Top 2 3D Printers of 2015, FlashForge Creator Pro is built for beginners and profession..

INR 90,900.00 INR 112,300.00

FlashForge Dreamer

FlashForge Dreamer

Rated in the Top 2 3D Printers of 2015, FlashForge is built for beginners and professionals alike.Dr..

INR 109,900.00 INR 135,000.00

FlashForge Finder

FlashForge Finder

Rated in the Top 2 3D Printers of 2015, and one of the best 3D Printers for Plug-and-Play FlashForge..

INR 49,900.00 INR 64,999.00

FlashForge Guider II

FlashForge Guider II

Guider II is an industrial grade 3D printer designed for the extreme hobbyist or pro user in mind. T..

INR 173,000.00 INR 199,900.00

FlashForge Hunter

FlashForge Hunter

The best DLP 3D Printer on the market! Flashforge Hunter is an advanced digital light processing (DL..

INR 359,900.00 INR 397,000.00

FlashForge Inventor

FlashForge Inventor

Inventor is a filament-based 3D printer with a totally-enclosed design that is safe to use indoors a..

INR 108,900.00 INR 124,900.00

FlashForge Inventor II

FlashForge Inventor II

Inventor II is the newest filament-based 3D printer designed for children and complete beginners who..

INR 59,200.00 INR 66,990.00

Magician Robot Controller

Magician Robot Controller

Magician = Arduino UNO + 0.8A Motor Driver + Servo Shield + Sensor Shield The Magician' Dual 0.8A..

INR 1,990.00 INR 2,700.00

Mini Driver Robot Controller

Mini Driver Robot Controller

Mini Driver = Arduino NG + 2A Motor Driver + Servo Shield + Sensor Shield + Bluetooth Shield + ISP P..

INR 1,600.00 INR 2,999.00

Robotic Claw

Robotic Claw

This fun robotic claw is ideal for those who love all things robotic! Simple instructions and suppli..

INR 750.00 INR 1,200.00

Spider Robot Controller

Spider Robot Controller

Spider = Arduino Mega + Servo Shield + Servo Expansion Shield This programmable controller from D..

INR 6,200.00 INR 10,499.00