Spice up your Arduino project with Arduino 3.2"TFT LCD Touch Shield with built in microSD card connection. This TFT display is big (3.2" diagonal) bright (6white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. As a bonus, this display has a optional resistive touch panel with controller XPT2046 attached by default and a optional capacitive touch panel with controller FT6236 attached by default, so you can detect finger presses anywhere on the screen and doesn't require pressing down on the screen with a stylus and has nice glossy glass cover.
The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you'll have it running in under 10 minutes! Works best with any classic Arduino (UNO/Due/Mega 2560).
This display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. You can connect more sensors, buttons and LEDs.
Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics library at the bottom of this page that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x,y and z (pressure) and example code to demonstrate all of it. The code is written for Arduino but can be easily ported to your favorite microcontroller!
Display Format: 240x320 Dots
Interface: 8080 8-bit Parallel , 8080 9-bit Parallel , 8080 16-bit Parallel , 3-Wire Serial SPI, 4-Wire Serial SPI
IC or Equivalent: ILI9341
Appearance: RGB on Black
Diagonal Size: 3.2”
Connection: Pin Header, FFC-Connector
Outline Dimension: 64.9(W)x89.4(H)mm
Visual Area: 48.60x64.80mm
Active Area: 48.60(W)x64.80(H)mm
Dot (Pixel) Pitch: 0.2025x0.2025
Display Type: TFT-LCD Color
Touch Panel Optional: Yes
Sunlight Readable: No
Response Time(Typ): 25ms
Contrast Ratio(Typ): 500:1
Viewing Angle Range: Left-60.0 , Right-60.0 , Up-50.0 , Down-50.0 degree
Backlight Color: White Color
Backlight Current (Typ): 120mA
Power Supply(Typ): 5V
Supply Current for LCM(Max): 130mA (Vdd=3.3V) 150mA (Vdd=5V)
Operating Temperature: -20℃~70℃
Storage Temperature: -30℃~80℃
1x 3.2 inch TFT LCD Display with ILI9341 Controller and Adaptor Board
1x Arduino Shield
Arduino 3.2 inch TFT LCD Touch Shield w/ILI9341
- Brand: JMoon Technologies
- Product Code: JMAR32TFT341
- Availability: 2