16 Channel PWM Controller is an I2C-controlled PWM driver with a built-in clock.
With 16 Channel PWM Controller you do not need to constantly send signals to occupy your micro-controller . It is 5V compatible and can use 3.3V to 6V for control with any micro-controller board. It can be used to control LEDs and Servo motors.
Each I2C bus can handle up to 62 driver boards, giving a total of 992 PWM outputs.
1.6Khz Adjustable Frequency PWM output
Can output 12 resolution for a stepper motor (At 60Hz refresh rate, this can reach 4us resolution )
Push-Pull or Open Output
Enable pin to quickly enable/disable all outputs
Power input terminals
Green power indicator
16 servo motors
Reverse polarity protected
V + line to provide large input voltages.
PWM output lines have a 220 ohm series resistor to protect and drive LEDs
16 Channel PWM Controller
- Brand: JMoon Technologies
- Product Code: JMMDS16PWM
- Availability: 5